Stars and Stripes Ultimate Touch Free Vehicle Wash Foam Cannon Kit

1. Fill both foamer bottles with 800 milliliters of water./p>

2. In one of the foamers, fill remaining with Stars.

3. In the other foamer, fill the remaining with Stripes.

4. Set adjustment knob on top of foamers to minimum, this will conserve soap usage and frequency of refills. If needed tighten knob toward plus to increase foam thickness and performance for extra dirty jobs or road film that has baked on for a long period of time.

1. Knock off any heavy build up with a high PSI pre-rinse.

2. Foam STARS onto vehicle, working from bottom to top. Work in a manageable sized section. Streaking can occur on polished aluminum if the soaps dry before they are rinsed off

3. Foam STRIPES directly over Stars working from bottom to top. Do not let the soap dwell. It's important to start rinsing while both soaps are still foamy and clinging to the surface.

4. Rinse eft to right starting at the bottom of the foamed area. Use high PSI and stay within 12" of surface. Doing this creates a line in the foam and lets you keep track of where you have not rinsed yet. Missing a section while rinsing will leave behind road film.

*When vehicle's surface temperature is hot, pre-cool with cold water rinse before soap application.

Try not to wash in direct sunlight as this will greatly accelerate drying. When washing mirror polished aluminum always make sure aluminum is cool to the touch before applying soap and never let soaps dry. If it's too hot to touch we recommend a cold water pre-rinse.