Stars + Stripes Patriot Powder: The Ultimate Touch Free Vehicle Wash

*TEST ON A DISCRETE AREA TO ENSURE COMPATIBILITY

1. Apply Stars to the vehicle from bottom to top. Work in small sections on large trucks to prevent soaps from drying if used in direct sunlight.

2. Apply Stripes directly over Stars so that they mix on the vehicle surface, this creates a pH shock to loosen road film.

3. Thoroughly rinse with high PSI at 6" to 12" from the surface working from bottom to top; this will help you not miss a spot as the high PSI is what will now fully remove the road film. Using a mitt to remove stubborn grime is ok if needed on the first wash.

4. Dry surface to prevent any water spots from forming. A leaf blower is ideal for saving time, or a drying towel with a spray detailer is even better to help take the vehicle to 100%.

Stars+Stripes are designed to be used on any type of vehicle. Our customers use these on everything from cars to motorcycles and quads to big rigs with highly polished aluminum and even heavy construction equipment.

Stars and Stripes is formulated for use on mirror polished aluminum. When washing polished aluminum it is helpful not to let any type of soap dry on it before rinsing, so we recommend washing in sections if working on highly polished surfaces.

It is designed to stay within the pH tolerances of ceramic coatings and sealants, both SiO2 and SiC.

Strength: The most important thing is to find the right ratio to use touch free soaps at, the stronger the mix the cleaner the vehicle, but you want to find the strength that works in your situation while not wasting the soaps.

Impact: It is also important to keep in mind when rinsing that the water pressure is now the physical contact with the surface of the vehicle to scrub it clean, so rinse close and thoroughly, we rinse bottom to top to help get a bit more consistent impact on the surface.

Time: Dwell time once the two soaps are mixed on the vehicle can also be helpful especially on vehicles that have not been washed in a long time, 3-5 minutes of dwell time generally helps here.

Heat helps if you have it, we recommend setting a heated power washer to 140 degrees for best results, which may actually reach right up to 100% clean. However heat is not required for up to 95% perfect results with good soft water and close contact high psi rinsing.

The softer your water the better the results. Ideal water can yield up to 95% of what you could achieve with a mitt wash.

Stars+Stripes are biodegradable. When used together these soaps will become a neutral pH, which is much better for the environment and also for your vehicle than high alkaline single step soaps.