Infinity 8

X Factor Complete Wash Bay System: Wall Mounted 220v Electric - Freedom Foamer Touch Free Kit 3.5GPM @3,000PSI

Sold out

$6,999.00

Sold out

Option: Mission Ready

TACTICAL STRIKE SPECS

1. X FACTOR WALL MOUNTED 220V 7.5HP SINGLE PHASE ELECTRIC POWER WASHER:

Dimensions:

Height: 28"
Width: 32"
Depth: 16"
250 lbs

Pump:

3.5GPM@3000PSI
Commercial Duty Triplex Plunger Pump (Rated for water inlet temperature of 140 degrees max)
Oil Bath Crank Case
Stainless Valves\
Brass Manifold
Direct Drive
Thermo Pump Protector

Electric Motor:

220 Volt
1 Phase
Motor draws 34 amps at startup, we recommend a 50 amp breaker
1750 RPM
Totally Enclosed Fan Cooled
Full Frame
1.15 Service Factor
Thermal Overload Protection
Continuous Duty

Electrical Control Panel:

Heavy Duty On/Off Cam Switch with Included Auto Stop/Start Time Delay Off
Power Cord Length 25' (Plug end not included)
Nema 4
Water Tight
Easy Access

Frame:

One Piece Bent Steel Base
All Powder Coated
Wall Mount (16" on center hole pattern)

2. 44" CHEM-X FREEDOM FOAMER LANCE:

Olight Odin 2000 Lumen Tactical Flashlight
Stainless Steel KEW connects
Replacement Foam Agitator Pad + O-Ring
Veloci Prima Stainless Steel QC fittings made in the USA
ST-75s Foamer w/ KEW inlet for one handed operation
KEW to QC Adaptor for one-handed up close rinsing
Min/Max Flow Rate: 1-6GPM
Min/Max PSI: 1000-40000 PSI
Max Temp: 212° (Recommended Temp is 125°-130°)
Adjustable Vented Grip

MTM HYDRO SGS35 SHUT OFF GUN:

Easy Hold Technology for Increased Cleaning Efficiency
Italian Manufactured
Low Profile Stainless Steel Live Swivel
Mas PSI: 5000 PSI
Max Flow Rate: 12 GPM

3. SUTTNER ST-160 SINGLE STEP FOAM INJECTOR:

Min/Max Flow Rate: 1-6gpm
Min/Max PSI: 1000-4000psi
Rated for 194 degree water
Plug + Play
Uses 4-5x Less Soap Than Traditional Style Injectors
9 Dosing Nozzles Included
Durable Stainless Steel Construction

4. 1 GALLON OLD GLORY

MISSION READY SPECS

1. X FACTOR WALL MOUNTED 220V 7.5HP SINGLE PHASE ELECTRIC POWER WASHER

Dimensions:

Height: 28"
Width: 32"
Depth: 16"
250 lbs

Pump:

3.5GPM@3000PSI
Commercial Duty Triplex Plunger Pump (Rated for water inlet temperature of 140 degrees max)
Oil Bath Crank Case
Stainless Valves\
Brass Manifold
Direct Drive
Thermo Pump Protector

Electric Motor:

220 Volt
1 Phase
Motor draws 34 amps at startup, we recommend a 50 amp breaker
1750 RPM
Totally Enclosed Fan Cooled
Full Frame
1.15 Service Factor
Thermal Overload Protection
Continuous Duty

Electrical Control Panel:

Heavy Duty On/Off Cam Switch with Included Auto Stop/Start Time Delay Off
Power Cord Length 25' (Plug end not included)
Nema 4
Water Tight
Easy Access

Frame:

One Piece Bent Steel Base
All Powder Coated
Wall Mount (16" on center hole pattern)

2. 44" CHEM-X FREEDOM FOAMER LANCE:

Olight Odin 2000 Lumen Tactical Flashlight
Stainless Steel KEW connects
Replacement Foam Agitator Pad + O-Ring
Veloci Prima Stainless Steel QC fittings made in the USA
ST-75s Foamer w/ KEW inlet for one handed operation
KEW to QC Adaptor for one-handed up close rinsing
Min/Max Flow Rate: 1-6GPM
Min/Max PSI: 1000-40000 PSI
Max Temp: 212° (Recommended Temp is 125°-130°)
Adjustable Vented Grip

MTM HYDRO SGS35 SHUT OFF GUN:

Easy Hold Technology for Increased Cleaning Efficiency
Italian Manufactured
Low Profile Stainless Steel Live Swivel
Mas PSI: 5000 PSI
Max Flow Rate: 12 GPM

3. SUTTNER ST-164 DUAL CHEMICAL INJECTOR:

Max Hose Length After Injection: 150'
Integrated Lever: Allows you to easily switch from Stars to Stripes
Durable Stainless Steel Housing
18 Metering/Dosing Nozzles: Each chemical can be set at individual desired strengths (comes pre set to run 100:1)
Min/Max Flow Rate: 1-18 GPM
Min/Max PSI: 1000-4000 PSI
Rated for 212° Water

4. 2 GALLONS STARS + 2 GALLONS STRIPES

X FACTOR COMPLETE WASH BAY SYSTEM

WALL MOUNTED 220V ELECTRIC - FREEDOM FOAMER KIT

This is the ultimate solution to streamline both shop space and wash time! The X Factor Wall Mounted Power Washer combined with our Freedom Foamer Kit make for an incredible system that will cut wash time down by as much as 90 percent.

Take your washing and detailing to the extreme!

GET STARTED WITH THE TACTICAL STRIKE TOUCH FREE VEHICLE WASH KIT

X Factor Wall Mounted 220v Electric Power Washer
Freedom Foamer Lance
Suttner ST-160 Foam Injector
1 Gallon Old Glory
100' High Pressure Hose rated for 4000psi
1 Soap Nozzle + 0°/15°/25°/40° Nozzles

SUTTNER ST-160 SINGLE FOAM INJECTOR

An efficient and durable foam injector available, with a dilution range from 10:1 to 200:1. It automatically dilutes the soap to a predetermined strength eliminating soap waste or pre-mixing. The ST-160 arrives pre-set by us to draw at 100:1(1%) dilution, the ideal strength for all of our super concentrated liquids.

OLD GLORY TOUCH FREE WASH

Like the legendary flag that earned its name through resilience and unity, Old Glory touch-free active foam stands as a testament to American innovation and strength. Just as Captain William Driver’s flag sailed the high seas and survived through the Civil War, our Old Glory soap is built to withstand the toughest conditions.

Designed to conquer grime, grease, and road film with unmatched efficiency, Old Glory symbolizes the same relentless spirit that keeps America moving forward. This touch-free foam cuts through the grit like a revolutionary force, saving time and effort while delivering a brilliant shine.

Let Old Glory wave proud in your arsenal of detailing products, a reminder that nothing stands in the way of progress, precision, and perfection. With its powerful active formula, it’s not just a soap; it’s a declaration of independence from dirt and grime.

ACHIEVE MASTERY WITH MISSION READY ULTIMATE TOUCH FREE VEHICLE WASH KIT

X Factor Wall Mounted 220v Electric Power Washer
Freedom Foamer Lance
Suttner ST-164 Dual Foam Injector
2 Gallons Stars + 2 Gallons Stripes
100' High Pressure Hose rated for 4000psi
10' Jumper Hose (Outlet to ST-164 Injector).
1 Soap Nozzle + 0°/15°/25°/40° Nozzles

SUTTNER ST-164 DUAL FOAMING CHEMICAL INJECTOR

The most efficient and durable foam injector available, with a dilution range from 12:1 to 200:1. The easiest way to select between two chemicals and rinse. Simply switch the lever on the top of the injector to the desired position(chem 1 or chem 2) and let the soap fly.

This injector also features a full port bypass, which allows full output from the power washer as well as the ability to rinse while in foaming mode, reducing impact for gentle applications like floor mat rinsing.

Metering tips control the soap's draw rate. The dosing nozzles have a pin-sized hole through which the soap is drawn; the size of this hole determines your soap-to-water ratio. We install the 0.7 ratio tips for automatic 100 parts water to 1 part soap, or 1% strength, when it arrives to you so that you can get to work without having to think about how the system is set. If you prefer to save costs, these injectors include a 200:1 ratio tip, which would cut soap costs in half per wash, or stronger tips if you find you need to use a more powerful solution in your situation. The dosing nozzles offer a dilution range from 12:1 to 200:1.

STARS AND STRIPES TOUCH FREE WASH

When Stars+Stripes mix on the vehicle surface, a resulting pH shock will activate the cleaning reaction. This dual stage process breaks the static bond of dirt and road film from the surface, allowing the high psi rinse to remove more grime than any single stage application and also results in a neutral pH. This process saves the user up to 80% of the time it would normally take to do a mitt wash. Using two soaps also lets us tackle more grime by allowing us to use a wider range of surfactants that help with many different types of grime.

THE X FACTOR

WALL MOUNTED 220V ELECTRIC POWER WASHER

PUMP + PLUMBING LAYOUT

These power washers feature a Commercial Duty Triplex Plunger Pump which is rated for an inlet water temperature of 140 degrees, along with our own unique plumbing layout designed for easy serviceability.

The VRT3 Unloader Valve (pressure actuated for foaming systems) is mounted with a 3/8 screw coupler to drastically reduce repair times, this layout also has minimal 90 degree fittings which helps to increase output PSI.

The garden hose inlet is a General Pump DuraView Filter to remove any particulates from the water line and can be visibly checked without opening.

CONTROLS

The auto start/stop feature protects the pump from overheating while the unit is on but water is not being sprayed by automatically turning off the pump after a 15-30 second period, the dual pressure switches on the machine will sense the psi drop the next time the trigger is squeezed and turn the motor back on.

These machines also feature an hour meter to determine the best times for pump oil changes. The TechTop Motor is totally enclosed and fan cooled with thermo protection to prevent overheating.

ULTIMATE QUALITY

FIGHT THE WAR ON GRIME WITH THE FREEDOM FOAMER LANCE

The Chem-X Freedom Foamer was designed and hand built by Chem-X. We took the very best components and pieced them together in a layout with pure functionality and durability in mind. An almost fully stainless lance that is built to hold up in harsh environments. With this lance you can change between foam and rinse directly at the gun. The MTM Hydro Mezzo Shuttle Valve allows selection of either rinse or foam with the push of a button. By far the best foam lance on the market!

- OLIGHT RAIL MOUNTED RECHARGEABLE TACTICAL FLASHLIGHT

Even in the most well-lit wash bays, there is never enough light. With this one-of-a-kind solution, you will never wonder again if you did, in fact, clean your wheel wells thoroughly. Engine bays, undercarriages, and trailer washouts will never be the same.

The OLIGHT Odin Rail Mounted Rechargeable Tactical Flashlight has been load tested in our studio for the last two years without a single failure, living up to our goals of offering durable solutions that are helpful

- MTM HYDRO SGS35 TRIGGER

Our favorite trigger option here at Chem-X, the SGS35 features a stainless steel live swivel to maximize efficiency while working. The added fully stainless KEW outlet allows different lance and nozzle attachments and allows rotation under high psi while not sacrificing durability at this junction like conventional QC fittings.

- MEZZO VALVE

The MTM Hydro Mezzo Shuttle Valve allows quick easy and durable selection between rinse and foaming functions. The valve allows complete changeover from the high psi rinse nozzle to the slightly lower psi foam nozzle, allowing the remote venturi injection at the ST-164 Injector to draw from your soap containers back at the power washer. This process eliminates refills entirely as well as the need to connect and disconnect foam cannons and rinse nozzles as would normally be the case.

- SILENCER MODE

Ideal for small projects or car detailing, this layout allows lightweight one-handed operation and a backup foam or rinse option if the full-length lance were to clog or malfunction while soaping or rinsing a vehicle

- HIGH-END FITTINGS

The Veloci Prima QC line is produced from 303 stainless steel sourced from the City of Steel, Pittsburgh, PA. It is machined to be three times more precise than standard QC fittings, resulting in a longer lifespan and a much higher quality feel. These QC fittings feature the smoothest action in the power washer industry, along with EPDM seals for high temperature and chemical tolerance.

INSTALLATION TIPS

MAINTENANCE TIPS

Awesome unit!

We have the 7.5hp x-factor and nothing else on the market comes close! Thing is a beast and makes our detailing operations much more enjoyable! Would highly recommend this product!

Man your set up is making me a little jealous lol! Thanks so much for using my system!😁❌💯

I'd put much time and energy into washing vehicles or something with other systems, but this wash bay system is a game changer.
The ready to go system puts me at ease.
I love it!
It's quite pricey, but it's well worth it.
If you're planning to get one, go for it.

GREAT SET UP

I was looking for a quicker way to clean my truck beside foaming it down and washing it with a truck brush. i ran across bob's video's on youtube and seen there touchless wash. i called and spoke with keith a couple of times before i ordered this system. i sent him some pictures of were i wanted to install it. i wash my truck every other week. and with a foam cannon and brush took to long. like i said i spoke with keith several times via phone and then i pulled the trigger and ordered this kit and man i'm so glad i did. this kit saved me so much time. the pressure washer works great and touchless wash works like he claims to. i am very happy with this kit. keith helped alot via phone with all of my questions and concerns about speeding up the wash process.

Real Deal Touchless

It worked better than expected, a real time saver when it comes to vehicle care.

Wow your set up is NICE! Thanks for using my systems!😁❌💯

BRAUNSCHEIDEL INC.

EXCELLENT service from start to finish on setting us up with a top-notch truck wash system for our facility. Great Job!

Man I'm glad to hear that thank you for grabbing the whole system Brian!😁❌💯

0 Products

Your cart is empty