Liquid-X: Polymer Sealant Mitt Wash

Bucket + Mitt Application - 2.5 gal water : 2 to 3 oz Liquid-X

Foam Cannon Application - 4 parts water : 1 part Liquid-X to 10 parts water : 1 part Liquid-X

Power Washer Application - 4 parts water : 1 part Liquid-X to 10 parts water : 1 part Liquid-X

Bucket + Mitt Application:

1. Pour 2-3oz of Liquid-X into bucket as a starting point
2. Add 2.5 gallons of water and use microfiber mitt or sponge to apply to vehicle
3. Rinse

Foam Cannon Application:

1. Pour Liquid-X into foamer cut 10:1 with water as a starting point
2. Foam onto Vehicle and then agitate with microfiber mitt or sponge
3. Rinse

Power Washer Application:

1. Dilution: Mix between 4:1 to 10:1 (water:product) based on desired strength
2. Pre-Rinse the vehicle to remove loose dirt and debris
3. Apply spray evenly to the vehicle surface
4. Use microfiber mitt, sponge or Super Soft Easy Reach brush to agitate the foam and lift contaminants
5. Rinse thoroughly

• Apply in shade or on a cool surface to prevent drying.
• Use a high-quality wash mitt to minimize the risk of scratching.
• Pair with a foam cannon and blow dryer for the best finish.
• Layer it with Snake Oil for even more hydrophobic protection.