X Factor Stationary 220v Electric Power Washer

INCLUDES

THE X FACTOR

Pump + Plumbing Layout

These power washers feature a Commercial Duty Triplex Plunger Pump which is rated for an inlet water temperature of 140 degrees, along with our own unique plumbing layout designed for easy serviceability.

The VRT3 Unloader Valve (pressure actuated for foaming systems) is mounted with a 3/8 screw coupler to drastically reduce repair times, this layout also has minimal 90 degree fittings which helps to increase output PSI.

The garden hose inlet is a General Pump DuraView Filter to remove any particulates from the water line and can be visibly checked without opening.

Controls

The auto start/stop feature protects the pump from overheating while the unit is on but water is not being sprayed by automatically turning off the pump after a 15-30 second period, the dual pressure switches on the machine will sense the psi drop the next time the trigger is squeezed and turn the motor back on.

These machines also feature an hour meter to determine the best times for pump oil changes. 

Stationary machines come wired with a connection/port for an included Remote On/Off Switch. The Remote Switch is typically mounted in convenient location away from the machine.

The TechTop Motor is totally enclosed and fan cooled with thermo protection to prevent overheating.

User Interface

We have paired these units with the highest quality trigger, lance and hose combination on the market. We chose the Suttner ST-2305 Squeeze Trigger with KEW Connects and a 48" Stainless Steel Lance. More info here.

KEW Connects give the flexibility of multiple length lances and attachments without the common o-ring issues typically seen in standard quick connects, they are much less likely to jam and also allow for swiveling the lance to get into tough areas like wheel wells and engine compartments.

The Mosmatic High PSI Gun Inlet Swivel eliminates hose fatigue, swiveling under full PSI. The dual wire braided 100' Hose offers maximum durability, rated for 6000psi.

Specs

• NEMA 4 Water Tight Controls Featuring Auto Start/Stop with Time Delay
• Commercial Duty Triplex Plunger General Pump 
• Heavy Duty Electric Motor (1750RPM/TEFC/Full Frame/Thermo Overload Protection/Continuous Duty)
• Powder Coated Frame w/Tip Ahead Shroud and Built in Belt Guard

Pump

• 4GPM@2000PSI (5hp model)
• 4GPM@3000PSI (7.5hp model)
• Commercial Duty Triplex Plunger Pump (Rated for water inlet temperature of 140 degrees max)
• Oil Bath Crank Case
• Stainless Valves
• Brass Manifold
• Belt Drive
• Thermo Pump Protector

Electric Motor (5hp + 7.5hp)

• 220 Volt
• 1 Phase
• 30 Amps (5hp model)
• 50 Amps (7.5hp model)
• 1750 RPM
• Totally Enclosed Fan Cooled 
• Full Frame
• 1.15 Service Factor
• Thermal Overload Protection
• Continuous Duty

Electrical Control Panel

• Heavy Duty On/Off Cam Switch with Included Auto Stop/Start Time Delay Off
• Nema 4
• Water Tight
• Easy Access
• Wired for Included Remote On/Off Switch

Frame

• Tip Ahead Shroud With Built in Belt Guard
• All Powder Coated
• Stand Mounted

Power Washer Dimensions

• Height: 58.5" (to the top of the control box)
• Width: 29"
  
• Depth: 24.5"

*Shipping

X Factors are stocked at Chem-X and are tested and prepared for shipping via freight in 3-7 business days from the point of order.

Once order is placed we will reach out to finalize shipping details.

X Factors are built in North America.